New M&D Flasher Licenses!
License 64 — GM ACDelco GEN1/2 OBDII
This module allows working via OBDII connector via CAN-bus with the control units ACDelco Gen1 (1st generation ECU-2 Byte SeedKey) and ACDelco Gen2 (2nd generation ECU — 5 Byte SeedKey), equipped on GM vehicles: Cadillac, Chevrolet, GMC, Hummer, Opel.
The module supports:
- ECU Identification
- Error Reading/Clearing
- Reading of the Processor FullFlash / Writing calibration area
Licence 65 — Renault ECU PETROL OBDII
This module allows you to work through the OBDII connector on the CAN bus with engine control units EMS3110, EMS3120, EMS3125, EMS3150, EMS3155, Hitachi based on the SH705822N processor, Valeo V40/V42, Sagem 3000, installed on Renault, Dacia, Nissan, VAZ cars.
Available functions:
- ECU Identification
- Error Reading/Clearing
- Reading / Writing the calibration area and the ECU program
- Reading / writing procedure takes from 2 to 10 minutes, depending on the type of ECU and the adapter used
- The module calculates the checksum of the calibration area
Attention! The operation of this module is completely safe, in case of loss of communication during writing, for example, if the battery on a laptop or the battery on a car runs out, it is
enough to repeat the recording procedure and the operation will be restored.
The activation files will be sent after 14.02.2021
License 64 — GM ACDelco GEN1/2 OBDII
Licence 65 — Renault ECU PETROL OBDII
