Autotuner Tool Slave

Autotuner is a universal tool able to read information from most ECUs and microcontrollers available on the market in boot Tricore Infineon (BSL) or via the OBD diagnostic socket. It is delivered with all the required accessories for both BSL and OBD in a dedicated package. More than 3500 control units is supported at this moment!

The Autotuner developers have considerable experience in microprocessor programming and automobile electronics as well as practical knowledge of chip tuning. This experience allows the Autotuner team to make solutions satisfying any demand. The hardware and software have been designed by the team exclusively, that is why they provide excellent technical support and release regular updates. Thanks to the modern high performance components (Cortex m4 CPU) used in the tool and the ECU communication optimization, Autotuner provides fastest possible reading of flash and eeprom.

The Autotuner software is regularly updated and has user friendly interface as well as the help section where you can find step-by-step instructions on how to connect to the ECU. The Autotuner special feature — no subscription! It allows to calculate its payback period. You can always be sure that your tool is up to date as new vehicles are added to the car list.

The software updates are released every month. Autotuner is one of the first companies that managed to add the support for the newest ECUs: Bosch MG1 (Ford), Continental SID208 (PSA), Bosch EDC17 & MEVD17 (BMW Exx and Fxx), including by-passing the protection with the help of CVN and flash counter as well as other popular Bosch, Siemens, Continental ECUs. Autotuner is available in Master and Slave versions. The file encryption and decryption process is handled by the tool. It can also be done automatically via the online decryption API.

Minimum System Requirements

• PC or laptop with Intel Pentium III/Athlon 1GHz CPU or newer;
• 512Mb of RAM; 2 Gb available hard disk space;
• Microsoft Windows Vista / 7 / 8 / 10 (32 or 64 bits);
• One available USB 2.0 port; Internet connection, 1 Mbps;
• Screen resolution not less than 1366×768.

The software is not compatible with virtual machines.

The Slave version of the tool does reading/writing in the special crypted format. A Slave tool is linked to a Master and forms a part of its network. A Slave owner is supposed to refer to its Master for tuned files. The Slave network requires the presence of at least one Master.