Toyota Lexus ECU Flasher
Item no.: 11T1000
- Toyota Lexus ECU Flasher hardware;
- Software
Toyota Flasher, a joint project by Autokey and PCMflash, is a multipurpose programmer for Denso and Fujitsu Ten ECUs with NEC processors installed in TOYOTA, LEXUS and SCION vehicles with petrol and diesel engines through JTAG interface. OBD writing via CAN bus is supported. It is a unique solution in the chip tuning world. It covers almost all the models beginning from 2003-2004. It can read, flash, clear, verificate internal flash memory of microcontrollers if connected to the appropriate connector on the ECU circuit board.
Supported ECUs:
All ECUs with the following processors NEC 7F00XX: 76F0038, 7F0038A, 76F0039, 76F0039A, 76F0040, 76F0040A, 76F0070 BGA, 76F0085 BGA. These processors were introduced at the beginning of CAN support and as a rule with coachwork change.
Advantages:
- Its own hardware interface allows to avoid all compatibility and driver problems;
- Work through built-in 20 or 26 pin JTAG connector;
- Full access to the ECU memory at high speed of more than 100 KB/s;
- Saving files in the open format;
- Firmware checksum verification and recalculation.
We can ship it from the developer but you need to pay for the delivery twice, should the order contain anything else beside the tool.
For connecting to Toyota Denso ECUs (JTAG plugs 20 and 26 pin). 10 probes, 1.27x5.8 step. To be used with the Alientech bench.
MeanWell GS15E-3P1J (12V, 1.25А). Recommended by the manufacturer.
