Chip tuning

BitBox is a flasher that allows identification, reading and writing of ECU internal flash memory for various purposes. It works via CAN bus or K-line data interfaces using an J2534 Pass-thru adapter.

MAGPro2 X17 tool is a solution for cars equipped with EDC16, EDC17, MED17, MED9, MEDV17, Marelli 6/8, Denso, Delphi and other state of the art ECUs.

MAGPro2 X17 tool is a solution for cars equipped with EDC16, EDC17, MED17, MED9, MEDV17, Marelli 6/8, Denso, Delphi and other state of the art ECUs.

The TCU MANAGER is a tool designed to reprogram and clone the most state of the art automatic gearboxes. It is essential for professional mechatronics as well as for amateurs. The tool is also suitable for racing use: ECU remapping also requires TCU remapping in order to supply correctly balanced power.

The TCU MANAGER is a tool designed to reprogram and clone the most state of the art automatic gearboxes. It is essential for professional mechatronics as well as for amateurs. The tool is also suitable for racing use: ECU remapping also requires TCU remapping in order to supply correctly balanced power.

BitBox Slave is a slave version of BitBox that allows identification, reading and writing of ECU internal flash memory for various purposes. It works via CAN bus or K-line data interfaces using an J2534 Pass-thru adapter.

The adapter is designed for switching J2534 and ECU power signals. The DB-15 connector is laid for the pinout of the K-Tag cable 14Р600КТ02.

This device is designed to connect an ECU to a flashing tool on the bench and to switch the supply voltage and GPT1, GPT2, as well as to generate of BOOT, CNF1 signals. It is compatible with CombiLoader in the automatic mode.

Chipsoft GPT adapter is desingned for generating necessary signals for password reading in Tricore processors (modern BMW, Mercedes).

MongoosePro Ford 2 is a low-cost, high-performance reprogramming vehicle interface for Ford vehicles. It has been test for use with Ford. It has been validated and approved by Ford for use with Motorcraft Ford Module programming software including All module flash programming, PATS key programming, and basic diagnostics functions.

MongoosePro Nissan is our low-cost, high-performance reprogramming diagnostics interface for Nissan vehicles. It harnesses the capabilities of Nissan's Consult III Plus R2R with full API 05.00 support, proving you don't always have to go big to succeed!

FEMTO OBD Flasher is a software solution for Bosch MDG1 ECUs family chip-tuning. With this tool you can easily make real and virtual Read of MDG1 ECU directly from the OBD socket. No need to remove or disassemble the ECU. All operations are easy and safe.