Chip tuning

DynoRoad The Portable Car Dyno is a fast and easy road dynamometer for testing your vehicle’s performance DynoRoad is an innovative mobile car dyno that measures power and torque in both electric and traditional vehicles via an app installed on your mobile device. This road dyno is so small and compact you can always have it with you and it can be installed on your car in just two minutes.

DynoRoad is a road test dyno that measures the power, torque, acceleration and other parameters of passenger cars and other traditional or electric vehicles. The device is equipped with a Bluetooth, WI-FI connection. The calibration and the measurement of engine parameters is monitored through a smartphone app. The device is characterized by a compact housing that can be carried with you on the go. Getting started with DynoRoad is as easy as mounting the car dyno on the vehicle’s wheel, pressing the ON / OFF switch and connecting it to your mobile device.

DynoRoad’s application software user interface is simple and intuitive, designed for anyone who knows how to use a mobile phone. The app helps you through the initial set-up of the car dyno and gives you clear and understandable options to accurately measure the horsepower and torque of your vehicle but you can also analyze and compare the results of these measurements.

• Measure vehicle power in a real-life scenario
• Customize your reports to your needs
• Analyze your measurements
• Compare your modification results

BSL Box V9.3 is a CombiLoader adapter for Bosch EDC16 BSM (J2534) and Bosch MEDC17 BSM (J2534) modules.

BSL Box V9.5 is a PCMflash (module 53 and 71), BitBox and MDflasher adapter.

TGFlash is a complete solution for ECU flash memory reading, virtual reading and reprogramming. TGFlash supports ECU identification, reading and DTC clearing. TGFlash communicates with ECU via any J2534 Passthru interface (OpenPort, Mongoose, PassThru ACTIA, Scanmatik, etc) or ENET cable.

Slave version saves ECU readouts which can be decoded only by its Master and can only use files provided by its Master.

TGFlash is a complete solution for ECU flash memory reading, virtual reading and reprogramming. TGFlash supports ECU identification, reading and DTC clearing. TGFlash communicates with ECU via any J2534 Passthru interface (OpenPort, Mongoose, PassThru ACTIA, Scanmatik, etc) or ENET cable.

DFOX allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket.

DFOX allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket.

WinOLS is an application, which is written especially to modify the memory contents of ECUs.

Boot/bench adapter V3 (DB25) for Scanmatik 2, for working with Modules 71, 77 and 53 from PCMFlash. The adapter has manual and automatic ECU power management and Boot pins.

KESS3 is the new Alientech ECU and TCU Programmer via OBD, Bench and Boot Mode all in a single tool.

Universal cable for connecting and programming the ECU on the bench using Combiloader and Scanmatic SM2/SM2PRO adapter.