Flashers

MultiFlasher is a chip-tuning solution intended for reading/writing FLASH and EEPROM memory of ECUs. It can use any adapter supporting J2534 standard, e.g. OpenPort 2.0 by Tactrix. Before flashing and after reading the program checks the firmware and checksums, and corrects them if needed. It allows to avoid flashing incorrect dumps or to make sure that reading is correct. It contains a function of errors reading, decoding and reset with a possibility to manually add and edit their description.

CMD Flash is a popular flasher in Europe which allows to tune a great number of vehicles of various brands. Its characteristic features are a considerable carlist and regular update of supported ECUs.

CMD Flash is a popular flasher in Europe which allows to tune a great number of vehicles of various brands. Its characteristic features are a considerable carlist and regular update of supported ECUs.

CMD Flash is a popular flasher in Europe which allows to tune a great number of vehicles of various brands. Its characteristic features are a considerable carlist and regular update of supported ECUs.

Toyota Flasher, a joint project by Autokey and PCMflash, is a multipurpose programmer for Denso and Fujitsu Ten ECUs with NEC processors installed in TOYOTA, LEXUS and SCION vehicles with petrol and diesel engines through JTAG interface. OBD writing via CAN bus is supported. It is a unique solution in the chip tuning world.

KESSv2 is a ECU and TCU, the best tool to write back the original or modified file in the vehicle ECU in a few minutes, simply communicating through the OBD port. Through an OBD standard port, or a dedicated connector, KESSv2 can be connected to cars, motorbikes, trucks, tractors and boats to read and write the parameters of the engine or of the transmission. The goal is to maximise the performance of the vehicle and of the electronic control unit, facing problems that a standard diagnostics cannot solve.

K-TAG Master is a professional universal bench programmer for ECUs and TCUs of cars, motorcycles, trucks, agricultural machinery and boats. 

KESSv2 Slave is a ECU and TCU, the best tool to write back the original or modified file in the vehicle ECU in a few minutes, simply communicating through the OBD port. Through an OBD standard port, or a dedicated connector, KESSv2 can be connected to cars, motorbikes, trucks, tractors and boats to read and write the parameters of the engine or of the transmission. The goal is to maximise the performance of the vehicle and of the electronic control unit, facing problems that a standard diagnostics cannot solve.

K-TAG Slave is a professional universal bench programmer for ECUs and TCUs of cars, motorcycles, trucks, agricultural machinery and boats. 

MAGPro2 X17 tool is a solution for cars equipped with EDC16, EDC17, MED17, MED9, MEDV17, Marelli 6/8, Denso, Delphi and other state of the art ECUs.

MAGPro2 X17 tool is a solution for cars equipped with EDC16, EDC17, MED17, MED9, MEDV17, Marelli 6/8, Denso, Delphi and other state of the art ECUs.

Autotuner is a universal tool able to read information from most ECUs and microcontrollers available on the market in boot Tricore Infineon (BSL) or via the OBD diagnostic socket. It is delivered with all the required accessories for both BSL and OBD in a dedicated package. More than 3500 control units is supported at this moment!