Adapters

The diagnostic scanner for the whole range of VAG (VW, Audi, Skoda, Seat) passenger vehicles. Mongoose Pro Volkswagen works with ODIS official dealer software and is recommended for use at all VAG dealer stations all over the world.

Mongoose-Plus GM 3 is a multifunctional adapter by DrewTech (USA) for GM vehicles diagnostics. It supports GDS2, TIS2WEB for module reprogramming as well as Tech2WIN for diagnostics. It is a perfect alternative to the more expensive GM MDI interface.

MongoosePro Nissan is our low-cost, high-performance reprogramming diagnostics interface for Nissan vehicles. It harnesses the capabilities of Nissan's Consult III Plus R2R with full API 05.00 support, proving you don't always have to go big to succeed!

The tool is designed for connecting an ECU to a J2534 device and provides manual or automatic power control of the ECU and shaping of the following signals: RESET, BOOT, CNF1, GPT1, GPT2, WATCDOG.

Scanmatik 2 PRO is a professional multibrand scanner designed for diagnostics of electronic control systems of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

CHIPSOFT J2534 Pro is the most advanced adapter by CHIPSOFT. In comparison with CHIPSOFT J2534 Lite and CHIPSOFT J2534 Mid, it has a wider functionality for diagnostics as it has two multiplexers for CAN bus and K-Line commutation. Since it supports a great number of third-party software using the J2534 protocol, it is an essential tool for diagnostics and chip tuning.

The CarDAQ-Plus 3 is the next generation Drew Technologies fully supported SAE J2534-1 and J2534-2 device with even more advanced support including: CAN FD, 4 CAN Channels, v05.00 API and DoIP. In addition, there is a high speed USB port to connect to a PC.

MongoosePro Chrysler is a relatively inexpensive high-performance adapter for diagnostics and reprogramming of Chrysler vehicles.

CombiBox is designed to connect an ECU to Combiloader and DIALink adapter on the bench and to switch power and GPT1, GPT2 signals, and to form BOOT, CNF1 signals.

BSL Box V9.3 is a CombiLoader adapter for Bosch EDC16 BSM (J2534) and Bosch MEDC17 BSM (J2534) modules.

BSL Box V9.5 is a PCMflash (module 53 and 71), BitBox and MDflasher adapter.

Boot/bench adapter V3 (DB25) for Scanmatik 2, for working with Modules 71, 77 and 53 from PCMFlash. The adapter has manual and automatic ECU power management and Boot pins.