Flashers

K-TAG Slave is a professional universal bench programmer for ECUs and TCUs of cars, motorcycles, trucks, agricultural machinery and boats. 

KESSv2 is a ECU and TCU, the best tool to write back the original or modified file in the vehicle ECU in a few minutes, simply communicating through the OBD port. Through an OBD standard port, or a dedicated connector, KESSv2 can be connected to cars, motorbikes, trucks, tractors and boats to read and write the parameters of the engine or of the transmission. The goal is to maximise the performance of the vehicle and of the electronic control unit, facing problems that a standard diagnostics cannot solve.

KESS3 is the new Alientech ECU and TCU Programmer via OBD, Bench and Boot Mode all in a single tool.

CMD Flash is a popular flasher in Europe which allows to tune a great number of vehicles of various brands. Its characteristic features are a considerable carlist and regular update of supported ECUs.

CMD Flash is a popular flasher in Europe which allows to tune a great number of vehicles of various brands. Its characteristic features are a considerable carlist and regular update of supported ECUs.

CMD Flash is a popular flasher in Europe which allows to tune a great number of vehicles of various brands. Its characteristic features are a considerable carlist and regular update of supported ECUs.

Openbox 3 — универсальный загрузчик, для программирования блоков управления, устанавливаемых на автомобили ВАЗ, ГАЗ, УАЗ, ЗАЗ, HYUNDAI, CHERY, GEELY, HAFEI, VORTEX ESTINA, BYD, GREAT WALL, МАЗ, УРАЛ, КАМАЗ, SHAANXI, FAW. Для большинства ЭБУ доступна возможность перепрограммирования через диагностический разъем. Официальная версия с электронным ключом защиты, обновлениями и тех. поддержкой.

Указана цена электронного ключа, пользователь может выбрать любой из доступных модулей (любую комбинацию модулей). Ключ без модулей не продается!

I/O Terminal is a software and hardware solution designed for work with a great number of ECUs, automatic transmissions,BSI installed in VAG, Mitsubishi, Mazda, Ford, Nissan, Subaru, Suzuki, Opel, Volvo, Alfa Romeo, Fiat, Jaguar, Land Rover, Lancia, Maseratti, Hyundai, Kia, Daewoo and other vehicles using the OBD-II data link connector.

This add-on to the main AutoScannerOpelCAN software is capable to reflash various Opel ECUs. The tool is useful for engine ECU chiptuning, restoring damaged firmware, programming new ECUs. The software works with the same hardware, as used by AutoScannerOpelCAN sofware, and requires an additional security dongle. The software is splitted into the modules, so you can choose and order only those module licenses, which are necessary in your work. New licenses can be added later via the internet.

CombiLoader v.3 is a software and hardware system for reading and writing FLASH and EEPROM in the ECUs installed in various vehicles. 

Truck Explorer Standard kit consists of most popular functions for trucks. You could work by OBD or by direct connection to the ECU on the table over DirectConnect 2U tool.